Gielo-Perczak, K., McNaboe, R., Posada-Quintero, H., (2024), “Using EMG to Better Understand Patient Pain and Stress During Routine Mammography” (Podium presentation). ASPIRE Conference of the Human Factors and Ergonomics Society, September 9-13, Phoenix, Arizona.
Gielo-Perczak, K., McNaboe, R., Posada-Quintero, H., (2024), “Evaluation of Patient Stress During Mammograms Through EMG Analysis” (Invited podium presentation). AHFE Conference, July 24-27, Nice, France.
Gielo-Perczak, K., (2024), “Work In Progress: New Pedagogical Strategies for Senior Design BME Projects Involving Industry Partners”. The 2024 American Society for Engineering Education Annual Conference, June 23-26, Portland, Oregon.
Mathioudakis, A., Gielo-Perczak, K. (2021), “A Mobile Application for Real-time Accelerometry and Electromyography Analysis in Rehabilitation with Cross-Axial Sensor Fusion Support”. IEEE BHI BSN, Virtual Conference, July 27 – 30.
Bowen, S., Gielo-Perczak, K. (2020), “Biomechanical analysis of device -assisted sit-to-stand transfers in young adults”, Virtual 44th Meeting of the American Society of Biomechanics, Virtual Conference, August 4-7.
DiGiacomo, G., Gielo-Perczak, K., (2019) Synchronization of EEG activity with body balance during cognitive visual exercises. The XXVII Conference of the International Society of Biomechanics/American Society of Biomechanics, July 31-August 4, Calgary, Canada.
Mathioudakis, A., Gielo-Perczak, K. (2019) Mobility enhancing device for sit-to-stand (MEDSTS). The XXVII Conference of the International Society of Biomechanics/American Society of Biomechanics, July 31-August 4, Calgary, Canada.
Gielo-Perczak, K., (2018) Bridging sciences to find new insights in design, The Twelfth International Conference on Design Principles and Practices, March 5-7, Barcelona, Spain.
Suresh, M., Bowen, S., Mathioudakis, A., Gielo-Perczak, K., (2017) Effects of a high intensity plyometric training regime on a postural control of young adults, The 41st Annual Meeting of the American Society of Biomechanics, August 8-11, Boulder, CO.
Mathioudakis, N.A., Bowen, S., Suresh, M., Gielo-Perczak, K., (2017) Musculoskeletal loading at the tibio-femoral joint for sit-to-stand maneuver, The XXVI Congress of the International Society of Biomechanics, July 23-27, Brisbane, Australia.
Mathioudakis, N.A., Bowen, S., Suresh, M., Gielo-Perczak, K., (2017) Musculoskeletal modeling at the tibio-femoral joint for sit-to-stand maneuver, The XVI International Symposium on Computer Simulation in Biomechanics , July 20-22, Brisbane, Australia.
Bowen, S., Abbiati, A., Gielo-Perczak, K., Gupta, S., Suresh, M., Mathioudakis, A. (2017) Development of a sit-to-stand assistive device for individuals with lower limb muscle weakness, The 43rd Northeast Bioengineering Conference (NEBEC), March 31-April 2, Newark, NJ.
Suresh, M., Bowen, S., Mathioudakis, N.A., Gielo-Perczak, K., (2017) Short-term, high intensity plyometric training improves balance in young adults, The 43rd Northeast Bioengineering Conference (NEBEC), March 31-April 2, Newark, NJ.
Bowen, S., Gielo-Perczak, K., (2016) Biomechanical Perspectives on Personalized Regenerative Medicine Through Musculoskeletal Modeling, in 1st Rock Stars of Regenerative Engineering Conference, Irvine, CA.
Warshauer, S., Roto, A., Gielo-Perczak, K., (2016) Time of Anterior Cruciate Ligament (ACL) Rehabilitation Using Biomechanical Factors, The 40th Annual Meeting of the American Society of Biomechanics, Raleigh, NC, August 2-5.
Bowen, S., Gielo-Perczak, K., (2016) Use of Muculoskeletal Modeling and Simulation to Investigte the Effect of Seat Angle on Sit-To-Stand Maneuver, The 40th Annual Meeting of the American Society of Biomechanics, Raleigh, NC, August 2-5.
Chomack, J., Lombardi, N., Schafer, R., Warshauer, S., Gielo-Perczak, K. (2015): Human Factors in Dynamic and Multi-Systems Rehabilitation Approach. The 1st Conference on Human Factors of Robots and Exoskeletons: Rehabilitation and Assistance during The 6th International Conference on Applied Human Factors and Ergonomics AHFE 2015, Las Vegas, NV, 26-31 July.
Gielo-Perczak, K., Narayan, R. (2014): Integration of Human-User Behavior Models in Controlled System for Improvement of Assistive Devices Design. The 7th World Congress of Biomechanics, Boston, MA, 6-11 July.
Gielo-Perczak, K. (2014): Multi-method Systems Modeling and Analysis: Is It Possible to Apply Holistic Design, Linking the Physical and Cognitive Aspects? The 5th International Conference on Applied Human Factors and Ergonomics AHFE 2014, Kraków, Poland, 19-23 July.
Gielo-Perczak, K. , Höfer, J., Manoukian, O., Baghsaw, K., Zlatev, V.: (2014): New Device Design in Emergency Medicine: Real-Time Intra-Articular Pressure Monitoring Device of the Shoulder Joint. The 5th International Conference on Applied Human Factors and Ergonomics AHFE 2014, Kraków, Poland, 19-23 July.
Kaplan, J., Kelley, M., Williams, J., Gielo-Perczak, K., Testing Device for Quantifying Error in Force Plates. The 40th North Eastern Biomedical Conference, Boston, MA, 25-28 April 2014.
Rudinskiy, M., Bula, M., Stahl, T., Davies, N., Fitzgerald, M., Gielo-Perczak, K., D’Andrea, S., (2014). Dual Actuated Gait Rehabilitation Treadmill Implementing Virtual Reality and Visual Postural Feedback. The 40th North Eastern Biomedical Conference, Boston, MA, 25-28 April 2014.
Gielo-Perczak, K., Bonato, P., Karwowski, W., Peter A. Hancock P.A., & Marras, W. (2012). Mutidisciplinary Concepts in Ergonomic Design and Individual Differences in Performance. Proceedings of the Human Factors and Ergonomics Society 56th Annual Meeting, Boston, MA, October 22-26.
Lemieux P.O., Gielo-Perczak K., Nuño N., Hagemeister N, (2012): Influence of the Stage of Massive Rotator Cuff Tear and of Adductor Co-activation on Activities of Daily Living: A Numerical Study; 6th International Shoulder Group Conference, Abersytwyth University in Wales, UK August 22-24.
Tuite, E., Martori, A., Gielo-Perczak, K., Mendelson, Y., Goggins, K. (2011): Design of Individual Balance Control Device Utilized During the Sit-to-Stand Task”, Proceedings XXIIIrd International Society of Biomechanics (No. 941), July 3-7, Brussels, Belgium.
Gielo-Perczak, K., Sotak, C., Dunn, R., Palumbo,N., Dahlmann, J., Brown, P. (2011): The Golden Section in Surgical Scalpel Handle as Preferred Design Fitting Hand and Dimensions with Surgeons’ Work Demands”, Proceedings XXIIIrd International Society of Biomechanics (No. 944), July 3-7, Brussels, Belgium.
Debayo, O., George, L., Marchand, M., Marrion, J., Gielo-Perczak, K., Higgins, L., Hoffman, A. (2011): Design of a new prosthetic alignment adaptor with quantitative alignment and height adjustment. Bioengineering Conference (NEBEC), Proceedings of the 2010 IEEE 37th Annual Northeast, (Digital Identifier 10.1109/ NEBEC.2011. 5778538), April 1-3, Troy, NY.
Gielo-Perczak, K., (2010): A Method of Geometric Description of the Glenoid Fossa, Proceedings 34th Annual Meeting of American Society of Biomechanics (No. 351), Providence, Rhode Island, USA.
Gielo-Perczak, K., (2010): Static Middle Deltoid Muscle Restraint to Superior-Inferior Translation of the Glenohumeral Joint. Proceedings of The International Shoulder Group (ISG) Conference, Minneapolis, Minnesota, pp.79-80.
Gielo-Perczak, K., Chen S.J., (2009): Applications of Computer Simulation Software to Testing Biomechanics in Biomedical Engineering Education, Proceedings of the XII International Symposium on Computer Simulation in Biomechanics, Cape Town, South Africa, pp.21
Gielo-Perczak, K., Matz, S.(2009): Influence of Glenoid Fossa Geometry on Shoulder Strength, Podium Presentation at the XXII Congress of the International Society of Biomechanics, Proceedings on CD (No. 584), Cape Town, South Africa.
Gielo-Perczak, K. , Matz, S., (2007). New parameter identified as important contributor to shoulder strength. Proceedings of the Sixth International Scientific Conference on Prevention of Work-Related Musculoskeletal Disorders (PREMUS), Boston, USA, pp.55.
DiDomenico, A., Gielo-Perczak, K., McGorry, R. W., & Chang, C.-C. (2007). Limitations of postural stability ratings. Proceedings of the Human Factors and Ergonomics Society 51st Annual Meeting, Baltimore, MD. pp.1219-1223.
DiDomenico, A., Gielo-Perczak, K., McGorry, R. W., & Chang, C.-C. (2007). Influences of center of pressure and body segment movements on perceptions of postural stability. No.305611, Abstracts of the 18th Conference of the International Society for Posture and Gait Research, Vermont.
Gielo-Perczak, K., DiDomenico, A., McGorry, R. W., & Chang, C.-C. (2006). Assessment of balance control while standing on a narrow beam. Abstracts of the 5th World Congress of Biomechanics – Munich, Germany: Journal of Biomechanics, vol. 39, Suppl. 1, No. 5231, S507.
Gielo-Perczak, K., Matz, S., An, K-N., (2006). Arm strength during one-handed pushing and its relationship to shoulder geometry. Abstracts of the 5th World Congress of Biomechanics – Munich, Germany: Journal of Biomechanics, vol. 39, Suppl. 1, No. 4880, S78.
Gielo-Perczak, K. (2006). Maximum one-handed pull force under constrained conditions and its relation to shoulder geometry. Abstracts of the 5th World Congress of Biomechanics – Munich, Germany: Journal of Biomechanics vol. 39, Suppl. 1, No. 5977, S166-S167.
Gielo-Perczak, K., Solomonow, M., Kumar, S., Karwowski, W., & Drury, C. (2006). Diversity of factors that are the best predictors of individual performance. Proceedings of the Human Factors and Ergonomics Society 50th Annual Meeting, San Francisco, CA. pp. 1236-1239.
Gielo-Perczak, K., Matz, S., & An, K. N. (2006). An influence of glenoid geometry on Iisometric shoulder strength during one-handed abduction. Paper presented at the XVIth Congress of the International Society of Electrophysiology and Kinesiology, Torino, Italy, p. 219.
Gielo-Perczak, K., Hancock, P., Karwowski, W., Marras, W., & Raja, P. (2005). Are we ready to consider individual differences in human capabilities in our workplace designs? Proceedings of the Human Factors and Ergonomics Society 49th Annual Meeting, Orlando, FL. pp. 1220-1223.
Gielo-Perczak, K. (2005). An Investigation of the Congruity in Geometry of the Glenohumeral Joint on the Maximum Acceptable Load during Pushing. Proceedings of the XXth Congress of the International Society of Biomechanics and 29th Annual Meeting of the American Society of Biomechanics, Cleveland, OH. p.438.
Gielo-Perczak, K. (2004). The golden section as a harmonizing feature of workplace design and human dimensions. In L. Schulze (Ed.), Proceedings of the 18th International Occupational Ergonomics and Safety Conference (on CD, Group 10, pp. 1-4), Houston, Texas.
Gielo-Perczak, K., Rasmussen, J., & Christensen, S. T. (2004). An analysis of load transmission within the human body during pushing and pulling. Proceedings of the 18th Annual International Occupational Ergonomics and Safety Conference: Building Bridges to Healthy Workplaces (on CD, Group 10, pp. 4-8), Houston, TX.
Gielo-Perczak, K., & Matz, S. (2004). An investigation of the congruity in geometry of the glenohumeral joint on the maximum acceptable load during pushing, Proceedings of the Human Factors and Ergonomics Society 48th Annual Meeting, New Orleans, LA, (pp. 1407-1411).
Gielo-Perczak, K., & Karwowski, W. (2003). The potential effect of emotions on the maximum work load at the glenohumeral joint during simulated tasks, Proceedings of the XVth Triennial Congress of the International Ergonomics Association and 7th Joint Conference of Ergonomics Society of Korea/Japan Ergonomics Society, pp. 443-446.
Karwowski, W., Cuevas, H., Hancock, P., Hettinger, L., Gielo-Perczak, K., Matthews, G., Wasburn D., Weaver, J. (2003). An investigation of the individual differences in geometry of the glenohumeral joint on the maximum acceptable workload, in a panel discussion on Considering the Importance of Individual Differences in Human Factors Research: No Longer Simply Confounding Noise. Proceedings of the Human Factors and Ergonomics Society 47th Annual Meeting, Denver, CO, pp. 1082-1086.
Gielo-Perczak, K., Karwowski, W., Kumar, S., & Marras, W. (2002). Methodological approaches to research on musculoskeletal complaints and injuries. Proceedings of the Human Factors and Ergonomics Society 46th Annual Meeting, Baltimore, MD. pp. 1032-1036.
Gielo-Perczak, K., & Leamon, T. B. (2002). Individual load limitation of the glenohumeral joint as a prevention tool for musculoskeletal injuries. Proceedings of the 4th World Congress of Biomechanics (No. 5266), Calgary, Alberta.
Gielo-Perczak, K., & Leamon, T. B. (2002b). An investigation of the individual differences in geometry of the glenohumeral joint on the maximum acceptable workload. Proceedings of 4th Meeting of the International Shoulder Group, Cleveland, OH. pp. 5-7.
Gielo-Perczak, K., & Leamon, T. B. (2001). Ergonomic aspects in biomechanical analysis of the glenohumeral joint. Proceedings of the XVIIIth Congress of the International Society of Biomechanics, No. 786, Zurich, Switzerland.
Chen, S.-J., Mercer, J. Gielo-Perczak, K., (2001). Effects of arch support on changes in arch height and center of pressure under different foot positions while loading. Paper presented at the Annual Conference of the American Society of Biomechanics, San Diego, CA. p. 353.
Gielo-Perczak, K., Patla, A. E., & Winter, D. A. (1999). Analysis of the combined effects of stiffness and damping of body system on the strategy of the control during quiet standing. Abstracts of the XVIIth Congress of the International Society of Biomechanics, Calgary, Canada, p. 832.
Gielo-Perczak, K., Patla, A. E., & Winter, D. A. (1998). Modeling of structural random response of body system during quiet standing. Proceedings of the North American Congress on Biomechanics, Waterloo, Canada, pp. 259-260.
Winter, D. A., Patla, A. E., Prince, F., Ishac, M. Gielo-Perczak, K., (1998). Stiffness control of quiet standing. Proceedings of the North American Congress on Biomechanics, Waterloo, Canada, pp. 301-302.
Gielo-Perczak, K., Patla, A. E., & Winter, D. A. (1997). Formulation of the body stiffness. Proceedings of the 13th International Symposium of International Society for Postural and Gait Research on Multisensory Control of Posture & Gait, Paris, France.
Gielo-Perczak, K. (1994). Biomechanical considerations for manual work limitations, Proceedings of the XIIth Congress of the International Ergonomics Association, Toronto, Canada, pp. 167-169.
Gielo-Perczak, K. (1994). Method of static load evaluation of the glenohumeral joint, Abstract Book of the Second World Congress of Biomechanics, Amsterdam, Netherlands, Vol. 1, p. 52.
Gielo-Perczak, K. (1994). An analysis of stress transmission within the wrist joint, Abstract Book of the Second World Congress of Biomechanics, Amsterdam, Netherlands, Vol. 1, p. 59.
Gielo-Perczak, K. (1994). Correlation of the geometry of the wrist joint with the load conveyed by the hand, Proceedings of the VIIth Conference of the Canadian Society for Biomechanics Calgary, Canada, (pp. 266-267).
Gielo-Perczak, K. (1994). Method of static load evaluation of the wrist joint. Abstracts of the International Society of Biomechanics XIVth Congress, Paris, France, Journal of Biomechanics, 27(6), p. 759.
Gielo-Perczak, K. (1993). Method of static load evaluation of the wrist joint, Proceedings of the XIVth International Congress of Biomechanics, Paris, France. pp. 472- 473.
Gielo-Perczak, K. (1993). Finite element modelling of the glenohumeral joint for trauma prevention. Proceedings of the VIIIth Meeting of the European Society of Biomechanics, 1992, Rome, Italy, Journal of Biomechanics, 26(7), p. 796.
Gielo-Perczak, K. (1992). Biomechanical analysis of the wrist joint in ergonomical aspects. Abstracts of NATO Advanced Research Workshop: Advances in the Biomechanics of the hand and wrist. Brussels, Belgium, p. 32.
Bignardi, C. & Gielo-Perczak, K. (1991). A 3-dimensional biomechanical model and analysis of femoral loads. Journal of Biomechanics, 24(6), p.486.
Gielo-Perczak, K. (1991). Computer modeling of glenohumeral joint loads as related to gymnastic rings technique. Proceedings of the XIIIth International Congress of Biomechanics, Perth, Australia, pp. 70-71.
Bignardi, C. & Gielo-Perczak, K. (1990). Mechanical aspect of 3-dimensional modelling of femoral loads. Proceedings of the VIIth Meeting of the European Society of Biomechanics, Aarhus, Denmark, p. 43.
Gielo-Perczak, K., Bignardi, K., Calderale, P.M. (1990). Mechanical analysis of 3-dimensional modeling of the femoral loads. Abstracts of the First World Congress of Biomechanics, San Diego, CA, Vol.1, p.175.
Gielo-Perczak, K., & Calderale, P. M. (1990). The effects of overloading and the injuries of the glenohumeral joint in sports. Proceedings of the First World Congress of Biomechanics, San Diego, CA, Vol.1, p. 124.
Siwicki, I., Komor, A., & Gielo-Perczak, K. (1989). CSSP – Continuous Simulation Software Package: An interactive package dedicated for simulation of biomechanical objects. Proceedings of the Second International Symposium on Computer Simulation in Biomechanics, Davis, California, p.5.
Gielo-Perczak, K., & Morecki, A. (1989). Biomechanical analysis of the glenohumeral joint in ergonomical aspects. Proceedings of the XII International Congress of Biomechanics, Davis, California, pp. 382. & Journal of Biomechanics, 22(10), p.1015.
Gielo-Perczak, K., Pogorzelski, W., & Morecki, A. (1989). Practical application of a multi criterion optimization based on the weight-correlation method to ergonomics. Proceedings of the First International Conference on Ergonomics of Advanced Manufacturing and Hybrid Automated Systems, Louisville, Kentucky, (pp. 97-102).
Komor, A., Faina, M., & Parfianowicz, L. & Gielo-Perczak, K. (1989). The use of mathematical modelling and computer-aided simulator in cycling motion performance improvement. Proceedings of the First IOC Word Congress on Sport Sciences, Colorado Springs, CO, PH-46/1 p. 337.
Gielo-Perczak, K. (1987). Experimental research of the glenohumeral joint geometry. Proceedings of the First Poland’s Conference of Biomechanics (In Polish), Gdansk, Poland, pp. 147-154.
Gielo-Perczak, K. (1987b). Glenohumeral joint: the structure and its models. Proceedings of the First Poland’s Conference of Biomechanics (In Polish), Gdansk, Poland, pp. 139-146.
Gielo-Perczak, K. (1980). Method of measurement of the lengths of muscle actions constituting the drive of the glenohumeral joint. Proceedings of the IXth Conference of Experimental Research in the Solid Body Mechanics (In Polish), Warsaw, Poland, pp. 97-100.